- By Best Solar Company PK
- 03 Nov, 2026
- Solar Policy
- 8 min read
If your business is weighing a rooftop system in 2026, the **IMF fixed charges** debate changes the maths. Islamabad has floated a two-part industrial tariff — shared with the International Monetary Fund — that is explicitly designed to penalise commercial and industrial (C&I) users who draw less power from the grid after moving to solar. For Pakistani factory owners, retailers, and warehouse operators, the lesson is simple: the way you size your system, and the sanctioned load you keep, now matters more than the panel price.
This guide explains what the plan does, how it stacks on top of the new net-billing regime, and the concrete steps C&I buyers should take before signing a contract.
What the IMF-backed tariff plan actually changes
The Power Division has confirmed a proposed "two-part industrial tariff" that splits your bill into a **fixed (capacity) charge** and a **variable (energy) charge**. The logic, per the Power Minister, is that fixed costs make up roughly 75% of generation expenses while actual electricity is only about 25% — so the state wants to recover those fixed costs regardless of how little you import.
Under the model reported by The Express Tribune:
- Industries using **more than 50% of their sanctioned load** could get energy-rate cuts of about **1–2 US cents/kWh**, pulling rates down to roughly **7–8 cents**, and nearer **6 cents** at very high utilisation.
- Industries that drop below that threshold — exactly what happens when you offset daytime demand with solar — face **heavier fixed charges** per kW of sanctioned load.
The IMF has reportedly asked for regular data on declining industrial grid demand and "grid exits" before approving the structure. Officials have called the tariff **optional rather than mandatory** for now, aimed first at industrial consumers, with possible extension to commercial and residential users later.
The grid no longer rewards you for using less. It rewards you for staying connected at high load — which is the opposite of what a solar investment is meant to achieve.
Fixed charges are already tied to your sanctioned load
This is not purely theoretical. Through S.R.O. 279(I)/2026 (effective February 2026), NEPRA already applies monthly fixed charges per kW of sanctioned load across DISCOs. For industry today:
- **B-1:** around Rs 1,000 per month
- **B-2, B-3, B-4:** about **Rs 1,250 per kW per month**, charged on **25% of your sanctioned load or your actual maximum demand indicator (MDI), whichever is higher**
That "whichever is higher" clause is the trap. Even if solar slashes your real demand, you keep paying on a floor set by your sanctioned load. One Karachi industrial user was billed **Rs 8,158 for just four units** — about Rs 2,040 per unit — because a fixed charge of roughly **Rs 6,750** sat on the bill regardless of consumption.
Why this hits C&I solar buyers hardest
Two policies now pull against each other. The **NEPRA Prosumer Regulations, 2026** ended classic net metering and moved new prosumers to **net billing**:
- Export buyback dropped to around **Rs 8.13 per unit**, down from about **Rs 25.9** — your exported units are no longer worth what you import.
- Agreement terms shortened from **7 years to 5 years**.
- System sizing is **capped at your sanctioned load** (removing the earlier headroom), and existing net-metering contracts stay protected for their remaining validity.
So you cannot size beyond your sanctioned load — yet keeping a high sanctioned load inflates your fixed charges under the IMF plan. Exporting surplus barely pays. The old "oversize and bank units with the grid" strategy is dead.
| Factor | Old net metering (pre-2026) | Net billing + IMF fixed-charge plan (2026) | |---|---|---| | Export value | ~Rs 25.9/unit, 1-for-1 offset | ~Rs 8.13/unit, no 1-for-1 | | System size cap | Up to ~1.5× sanctioned load | Capped at sanctioned load | | Fixed charge logic | Minor | Rs 1,250/kW on 25% of sanctioned load or MDI | | Best strategy | Maximise export | Maximise self-consumption | | Contract term | 7 years | 5 years |
How to size a solar system under the new rules
Here is the practical, first-hand approach we now recommend to C&I clients — and the original insight most vendors miss: **design for self-consumption, not for export.**
1. **Measure your real daytime load profile first.** Pull 12 months of bills and, ideally, a load survey. Size the array to cover daytime base load — the demand you actually run while the sun is up — rather than your peak sanctioned figure. 2. **Match generation to consumption, not to the roof.** Because buyback is only ~Rs 8/unit, every exported kWh is a near loss versus the ~Rs 26/unit you avoid by self-consuming. A tighter array with higher self-use beats a bigger one that dumps surplus. 3. **Add storage for the evening peak.** A battery lets you shift solar into the 5 pm–9 pm peak window (where B-tariffs hit ~Rs 35/unit), improving payback far more than selling cheap daytime units back. 4. **Model the two-part tariff both ways.** If the optional industrial tariff is offered, run the numbers at >50% utilisation (cheaper energy) versus staying on the standard schedule. For single-shift units, the fixed-charge penalty may outweigh the energy discount.
Reduce your sanctioned load before you go solar
The single highest-leverage move is often overlooked: **apply to your DISCO to reduce your sanctioned load** once solar covers a chunk of demand. Since fixed charges scale with sanctioned load (subject to the MDI floor), a load that genuinely matches your post-solar demand can cut your monthly fixed bill materially. Do this *after* your system is commissioned and your MDI has settled lower — reducing it too early can trip the "whichever is higher" clause.
For larger plants, also consider keeping a modest grid connection purely for reliability while maximising on-site generation, rather than a full disconnection that still carries capacity charges. See our deeper guides on net billing under the Prosumer Regulations 2026 and commercial solar system sizing in Pakistan.
Frequently Asked Questions
**Will the IMF fixed charges apply to my business automatically?**
Not yet. The two-part industrial tariff is currently described as optional and is being discussed with the IMF before approval. However, the existing per-kW fixed charges on sanctioned load under S.R.O. 279(I)/2026 already apply to industrial and commercial connections today.
**Does going solar reduce my fixed charges?**
Not directly. Fixed charges are billed on 25% of your sanctioned load or your actual MDI, whichever is higher. Solar lowers your energy charges, but you must formally reduce your sanctioned load with the DISCO to cut the fixed portion.
**Should I still install solar in 2026 given these changes?**
Yes, for most C&I users — but design it differently. With buyback cut to ~Rs 8.13/unit and the ~Rs 26/unit import rate, self-consumption and battery-backed peak shifting deliver the returns. Export-heavy designs no longer pay off.
**Can I install a system bigger than my sanctioned load?**
Not for a net-billing agreement. The Prosumer Regulations 2026 cap approved solar capacity at your sanctioned load. A larger off-grid-style array is possible but will not be eligible for grid export credit.
The bottom line
The IMF fixed charges plan reframes the entire C&I solar decision in Pakistan. Panels are cheaper than ever, but policy now rewards high grid utilisation and punishes thin daytime demand. Win by sizing for self-consumption, adding storage for the peak, modelling the optional tariff carefully, and right-sizing your sanctioned load after commissioning.
Want a system engineered for the 2026 net-billing and fixed-charge reality? Request a free load study and C&I solar proposal from Best Solar Company PK and size it right the first time.
Best Solar Company PK designs and installs reliable solar systems in Rawalpindi, Islamabad, Lahore, Multan, Taunsa Sharif and Karachi. Contact us for a free survey and the best advice for your home or business.








